T-Gage V Series UT Thickness Gages

Category:

Overview

The T-Gage V series offers the latest technologies that will make inspection easier and each model has been built to perform in the roughest of industry conditions. The suite of gauges come with monochrome displays as standard. To enhance the user experience functionality (W). Simple upgrade options are available throughout the life of your gauge.

Specification

Thickness Range 0.20 mm – 508mm (0.008 – 20 inches) (dependant on material temperature
and transducer selection)
• • •
Delay Line Zero
Measurement
Auto at power up with listed numeric value. Ideal for correcting delay line
wear/curvature & for transducer acoustic drift at elevated temperatures.
• • •
Scan Mode Displays minimum or maximum thickness value at 20 measurements
Differential Mode Displays the difference from the actual thickness measurement and a user
entered reference value.
per second.
• • •
Hold Mode Holds display to retain last thickness reading with reverse video display • • •
Freeze Mode Freezes display • • •
Units Inches/Millimetres/Microseconds • • •
Gain Low, Standard or High for varying test conditions . • • •
Differential Mode Displays the difference from the actual thickness measurement and a user
set reference value
– • •
Alarms
keypad illumination.
– • •
Illuminating
Keypad
F1=Red, F2 = Yellow and F3=Green for easy go/no-go testing (patent pending) – • •
Automatic probe wear
indicator
Automatically informs the operator to replace the transducer (patent pending) – – •
Echo to Echo Measures the metal thickness only (ignores paint and coatings) – • •
Non-Encoded B-Scan Displays a cross section of the test piece – – •
Data XLS Datalogging software – Upgrades available. – – •
PHYSICAL
Weight: 230g (8 ounces)
Size: 76.2mm x 127mm x 31.8mm (3” x 5” x 1.25”)
Operating Temperture: -20° to 50°C (-4° to 122°F)
Material Surface Temp: -20° to 537°c (-4° to 1000°F) Depending on probe use.
Ergonomics:
Backlight: Light emitting diode. On/Off or Auto On, based on valid reading being taken
or last key press.
Shut Off: Auto time out (after X minutes user programmable after no-reading, loss or
no keypress).
POWER SOURCE
Battery Type: 2 x AA alkaline.
Battery Life: Operates for 50 hours (20 hours with backlight on).
Display: 128 x 64 Graphics LCD monochrome. 220 x 170 Graphic Colour TFT display.
Information Displays:
Resolution: 0.01mm (0.001 ins).
Bandwidth: 0.5 – 20 MHz (-3dB).
Measurement rate: 20/sec and 4/sec in fast mode
Units: English/Metric/Microseconds
Warranty: Limited 2 year warranty on parts and labour.
Casing: Customised, splash proof (IP54), high impact plastic with rubber. Illuminated
keypad for go/no-go testing.
Shipping Case: Hard plastics with high density moulded cut out for all accessories (optional)
Carrying Pouch: Custom moulded pouch with wrist strap for left or right handed operators

Download

Reviews

There are no reviews yet.

Be the first to review “T-Gage V Series UT Thickness Gages”

Your email address will not be published. Required fields are marked *