Overview
General Appearance & Composition
- Cleaner / Remover for Red & Fluorescent Penetrant Testing
- FLUXO S190 is a mixture of solvents
- Method C according to EN ISO 3452
- Processing Temperature: 0° to 50°C
- Manufacturer: SREM TECHNOLOGIES
- Made In FRANCE
- Package: 500ml Aerosol can
Specification
Approval & Specifications
- EN ISO 3452-2
- EN ISO 3452-6 – Low Temperature
- RCC-M Code
- ASME – Boiler and Pressure Vessel Code – Section V
- ASTM E 1417 – ASTM E 165
- Low in Sulphur & Halogens (Nuclear Quality)
- PMUC – Can be used in nuclear plants
Properties
- Aspect: clear liquid
- Density (20°C): 0,72
- Flash Point: -4°C
- Compatible with any metal & many synthetic materials
Instructions for Use
- Cleaning: Remove rust, tinder and all contaminations from the part with FLUXO S190 cleaner
- Application of Penetrant: Apply FLUXO Penetrant: Application by immersion, spraying, brushing, dipping, etc… Allow to penetrate for at least 10 minutes.
- Removal: Remove the excess penetrant from the surface, with water. If you can’t or don’t want to use water, remove the excess penetrant with solvent FLUXO S190 or remover FLUXO N130.
- Drying: Begin drying procedure immediately after water wash.
- Developing: Apply FLUXO R175 / FLUXO R180 developer on the part, achieving a thin and uniform layer.
- Inspection: Parts shall be inspected as per ISO 3059 standard requirements. Surface defects will appear as red or fluorescent indication.
Reviews
There are no reviews yet.