FLUXO 3 Black Magnetic Ink

Specification

Approval & Specifications

• EN ISO 9934-2
• AMS 2641 Type 2 – Vehicle, Magnetic Particle Inspection, Petroleum Base
• AMS 3041 Magnetic Particles, non-fluorescent, Wet method, oil vehicle, ready to use
• ASTM E1444 – Section 5.8
• ASME BOILER AND PRESSURE VESSEL CODE, SECTION V
• Code RCC-M – Tome III
• ASTM E709
• Low in Sulphur & Halogens (Nuclear Quality)
• PMUC – Can be used in nuclear plants

Properties

• Performance: 70mm in reference block type 2
• Aspect & color: black powder
• Particle size: 1 μm
• Settlement rate (1 hour): 1,2 to 2,4 ml/100 ml
• Flash Point: > 80°C
• Mechanic stability: stable product
• Stability in time: minimum 60 months
• Density: 815 g.cm-3 (15°C)

Application

• Remove tinder, rust and other contaminations from surface.
• For a good contrast: spray a thin film of FLUXO White Contrast Paint on the surface of the part.
• During magnetization spray FLUXO 3 on the surface.
• Defects will appear as black magnetic particle indications under daylight.
• After control the surface can be cleaned with FLUXO 5 Paint Remover.