Overview
General Appearance & Composition
- Water Washable and Solvent Removable Red Dye Penetrant
- FLUXO P139 is a stable solution of petroleum distillates (high flash point), nonionic surfactants and
red dyes.
- Method A/C – Type 2 – Level 2 according to EN ISO 3452
- High resistance to overwash
- Processing Temperature: 0° to 50°C
- Manufacturer: SREM TECHNOLOGIES
- Made In FRANCE
- Package: 500ml Aerosol can
Specification
Approval & Specifications
- Sensitivity Level 2 according EN ISO 3452-2
- EN ISO 3452-2
- EN ISO 3452-6 (Low temperature)
- RCC-M Code
- ASME – Boiler and Pressure Vessel Code – Section V
- ASTM E 1417 – ASTM E 165
- Low in Sulphur & Halogens (Nuclear Quality)
Properties
- Aspect: Red Liquid
- Density (20°C): 0,860
- Flash Point: > 82°C
- Viscosity : 3 mm²/s (40°C)
- Compatible with any metal & many synthetic materials
Instructions for Use
- Cleaning: Remove rust, tinder and all contaminations from the part with FLUXO cleaner
- Application of Penetrant: Apply FLUXO P139: Application by immersion, spraying, brushing, dipping, etc… Allow to penetrate for at least 10 minutes.
- Removal: Remove the excess penetrant from the surface, with water. If you can’t or don’t want to use water, remove the excess penetrant with solvent FLUXO S190 or remover FLUXO N130.
- Drying: Begin drying procedure immediately after water wash.
- Developing: Apply FLUXO developer on the part, achieving a thin and uniform layer.
- Inspection: Parts shall be inspected as per ISO 3059 standard requirements. Surface defects will appear as red indication.
Reviews
There are no reviews yet.